SPACERFIX
Product data
Technical data
Installation
Performances
Part number designation
On demand
Selection guide
 
Technical data / Performances

< Torque - Tensile force - Push-out - Stainless steel grades >

Torque resistance

Direct torque
This value is representative of push-out resistance after ageing.

SPACERFIX Direct torque

Indirect torque
In most cases, indirect torque resistance is higher (even much higher) than recommended maximum tightening torque for 8.8 grade bolts with a friction coefficient of 0.20.
The value shown in the data sheets has therefore been limited to the recommended maximum tightening torque for 8.8 grade bolts with a friction coefficient of 0.20.
In other cases, the value shown in the data sheets corresponds to the recommended torque value that is compatible with SPACERFIX™ indirect torque resistance.

SPACERFIX Indirect torque

Recommended maximum tightening torque (N.m) - NF E25-030 (8.8 grade bolt)

Friction coefficient M 3 M 4 M 5 M 6
0.20 1.4 3.2 6.4 11.1
0.15 1.2 2.8 5.5 9.5
0.10 0.9 2.2 4.3 7.5

< Torque - Tensile force - Push-out - Stainless steel grades >

Tensile force

This value is representative of the force applied after assembly on SPACERFIX™.
The tensile force values are provided in the SPACERFIX™ data sheets.

SPACERFIX Tensile force SPACERFIX Concealed Tensile force
Concealed

< Torque - Tensile force - Push-out - Stainless steel grades >

Push-out force

This value is representative of the component’s resistance before assembly.
Push-out force values are provided in the SPACERFIX™ data sheets.

SPACERFIX Push-out force

Data related to those tests is provided as a guideline only. These values may vary in accordance with the materials used and implementation conditions. It is recommended that tests be conducted in the actual application conditions.

< Torque - Tensile force - Push-out - Stainless steel grades >

Stainless steel grades

SPACERFIX Inox SPACERFIX Couleur Inox Stainless steel: The SPACERFIX™ stainless steel range is produced using stainless steel from the austenitic family. This material is recognised for its effectiveness in corrosive environments.
SPACERFIX Inox 316L SPACERFIX Couleur Inox 316L 316L Stainless steel: A4 austenitic stainless steel. The presence of Molybdenum in its composition encourages the auto-generation of a passive coating. This coating offers a natural protection which preserves the intrinsic properties of the component.
SPACERFIX™ 316L stainless steel components can be recognized by the groove on the body.
SPACERFIX Inox HR SPACERFIX Couleur Inox HR HR Stainless steel: The mechanical resistance of these HR stainless steel components facilitates and allows crimping on extremely hard workpieces (up to 90 HRB). The HR range is therefore the optimal solution, in mechanical terms, for stainless steel to stainless steel crimping.
HR stainless steel SPACERFIX™ components can be recognized by the wide groove on the body.
For extremely harsh environments and specific applications, LA CLUSIENNE-CLUFIX offers custom-made products that are extremely resistant to corrosion.

Return to top

 
© 2009-2017 LA CLUSIENNE-CLUFIX | Legal | Credits | Contact | Languages : FR - EN - DE - IT - CN