Elementi filettati, standardizzazione
Introduction
Definitions
Metric threads
Other thread profiles
Recommended torque
 
Threaded elements / Metric threads

Designation of an ISO metric thread

The ISO metric thread is used for the majority of threaded components. Designation detail :
M symbol followed by nominal diameter (for example, d = 8) and pitch (for example P = 1.25) separated by the multiplication sign then followed by the grade (for example: 6) and the thread gap (for example g).

For a screw or bolt: M8 x 1.25 6g
For a nut: M8 x 1.25 6H

Filetages métriques - Désignation
Letter 'M' followed by nominal Ø d
Example : d = 8 mm
Pitch (distance between two threads)
Example : P = 1.25 mm
Rond Vert Grade (3 to 9)
Rond Violet Tolerance thread gap
e, f, g, h = For threads
G, H = For internal threads

For external threads, the gap is specified by a lower case letter, and for internal threads by a capital letter.
The tolerance system is expressed by fundamental tolerances which can be graded from 3 to 9 in accordance with diameter and by fundamental thread gaps marked H and G for internal threads, and e, f, g and h for external threads.
The LA CLUSIENNE-CLUFIX nut-type product families comply with the 6H tolerance system.
The LA CLUSIENNE-CLUFIX screw or bolt-type product families comply with the 6g tolerance system.

The table here after contains the ISO standardized dimensional thread data.

Filetages métriques - 3D assemblage vis-écrou Filetages métriques - Filetage ISO
d = D = nominal diameter d2 = D2 = d - 0.6495 P P = Pitch H1 = 0.5412 P
d1 = D1 = d - 1.0825 P d3 = d - 1.2268 P H = 0.866 P r = 0.1443 P

All LA CLUSIENNE-CLUFIX component families complie with the ISO metric threads above.
Nominal dimensions (including pitch) of screw, bolt and nut families, are specified in the first column of the products data sheets.
The dimensions of standard external and internal threads of LA CLUSIENNE- CLUFIX products are compliant with the ISO 262 standard (ISO metric threads for general use - Selection of dimensions for screws, bolts and nuts).

Standardized dimensions (NF ISO 261 - NF ISO 262)

d or D Coarse pitch thread (screws, bolts and nuts and other common applications)
6H/6g tolerances (µm)
Fine pitch thread
Pitch Core
section mm²
d2 = D2 Tolerances on d2 Tolerances on D2 D1 Tolerances on D1 Recommended
fine pitches
Max. Min. Max. Min. Max. Min.

2

0.4 1.79 1.740 - 19 - 86 + 90 0 1.567 + 112 0 0.25
2.5 0.45 2.98 2.208 - 20 - 91 + 95 0 2.013 + 125 0 0.35
3 0.5 4.47 2.675 - 20 - 95 + 100 0 2.459 + 140 0 0.35
4 0.7 7.75 3.545 - 22 - 112 + 118 0 3.242 + 180 0 0.5
5 0.8 12.7 4.480 - 24 - 119 + 125 0 4.134 + 200 0 0.5
6 1.0 17.9 5.350 - 26 - 138 + 150 0 4.918 + 235 0 0.75

8

1.25 32.9 7.188 - 28 - 146 + 160 0 6.647 + 265 0 0.75 - 1
10 1.5 52.3 9.026 - 32 - 164 + 180 0 8.376 + 300 0 0.75 - 1 - 1.25
12 1.75 76.2 10.863 - 34 - 184 + 200 0 10.106 + 335 0 1 - 1.25 - 2.5
14 2.0 105 12.701 - 38 - 198 + 212 0 11.835 + 375 0 1 - 1.25 - 2.5
16 2.0 144 14.701 - 38 - 198 + 212 0 13.835 + 375 0 1 - 1.5

<< Back

 
© 2009-2017 LA CLUSIENNE-CLUFIX | Informazioni legali | Credits | Contatti | Lingue : FR - EN - DE - IT - CN