Clufix : Performances

FLUSHFIX®

Informazioni prodotto

Technical data / Performances

< Torque - Tensile force - Tube in tube >

Indirect torque

FLUSHFIX® can be used according to recommended maximum indirect torque given in the chart below:

Recommended maximum tightening torque (N.m)
NF E25-030 (8.8 grade bolt)

Friction coefficient	M 6	M 8	M 10
0.20	11.1	27	53
0.15	9.5	23	46
0.10	7.5	18.2	36

< Torque - Tensile force - Tube in tube >

Tensile force

Guideline tensile force values correspond to the force required to separate FLUSHFIX® from its workpiece (values provided in the data sheets).

FLUSHFIX Tensile force

This is a destructive test, and is carried out with 12.9 grade bolts.

< Torque - Tensile force - Tube in tube >

Tube in tube applications

FLUSHFIX® can be used whith a set screw assembly provided that the workpiece resistance is not exceeded. The use of a thumb screw to limit torque is recommended.
Use of a thicker tube reduces workpiece deformation and increases applicable torque.

Setting forces, tensile forces and internal protrusion all depend on the workpiece: i.e. thickness and hardness of the metal sheet.

Return to top