Clufix : Oleopneumatic Crimping Tools

TOOLIN'FIX™

Gamma

Oleopneumatic Crimping Tools

Crimping Hand Pliers

Oleopneumatic Riveting Tools

Riveting Hand Pliers

Presses

Codifica

Oleopneumatic Crimping Tools

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS100

code 99S100

2 930 g

• Force = 2800 daN
• Stroke = 2 - 8 mm

Case containing one oleopneumatic crimping tool for threaded inserts delivered with M4 to M12 standard tooling

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 4
M 5
M 6
M 8
M 10
M 12

CLUFIX-STUD™

Ø M	Steel
M 5
M 6
M 8

TOOLING FOR TFS100

CLUFIX®

Anvils and tie-rods (hexagon socket head cap screws 12.9 grade)

ANVIL

TOOLIN'FIX Tirant CLUFIX
TIE-ROD

Ø M	Code
M 4	99S10001EN040
M 5	99S10001EN050
M 6	99S10001EN060
M 8	99S10001EN080
M 10	99S10001EN100
M 12	99S10001EN120

Ø M x l	Code
M 4 x 70	99S10001TI040
M 5 x 70	99S10001TI050
M 6 x 70	99S10001TI060
M 8 x 70	99S10001TI080
M 10 x 70	99S10001TI100
M 12 x 70	99S10001TI120

Extended anvils and tie-rods

TOOLINFIX Enclume Prolongée CLUFIX
ANVIL

TOOLINFIX Tirant Prolongé CLUFIX
TIE-ROD

Ø M	d x l	Code
M 4	Ø 8.5 x 25	99S10001EN201
	Ø 8.5 x 50	99S10001EN202
M 5	Ø 9.5 x 25	99S10001EN203
	Ø 9.5 x 50	99S10001EN204
M6	Ø 11.5 x 25	99S10001EN205
	Ø 11.5 x 50	99S10001EN206
M 8	Ø 14.5 x 25	99S10001EN207
	Ø 14.5 x 50	99S10001EN208

Ø M	d x l	Code
M 4	M 4 x 90	99S10001TI201
	M 4 x 120	99S10001TI202
M 5	M 5 x 100	99S10001TI203
	M 5 x 120	99S10001TI204
M 6	M 6 x 100	99S10001TI205
	M 6 x 120	99S10001TI206
M 8	M 8 x 100	99S10001TI207
	M 8 x 120	99S10001TI208

CLUFIX-STUD™

CLUFIX-STUD™ tie-rod

TOOLINFIX Tirant CLUFIX-STUD
TIE-ROD

Ø M	Code
M 5	99S10003TI050
M 6	99S10003TI060
M 8	99S10003TI080

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS101

code 99S101

2 150 g

• Force = 1450 daN
• Stroke = 1 à 7 mm

Case containing one oleopneumatic crimping tool for threaded inserts delivered with M3 to M8 standard tooling

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 2.5
M 3
M 4
M 5
M 6
M 8

TOOLING FOR TFS101

CLUFIX®

Anvils and tie-rods

ANVIL

TOOLINFIX Tirant CLUFIX-STUD
TIE-ROD

Ø M	Code
M 2.5	99S10101EN025
M 3	99S10101EN030
M 4	99S10101EN040
M 5	99S10101EN050
M 6	99S10101EN060
M 8	99S10101EN080

Ø M	Code
M 2.5	99S10101TI025
M 3	99S10101TI030
M 4	99S10101TI040
M 5	99S10101TI050
M 6	99S10101TI060
M 8	99S10101TI080

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS102

code 99S102

6 850 g

• Force = 2800 daN
• Stroke = 9 mm max.

(AP70304)

2 930 g

• Force = 2400 daN
• Stroke = 9 mm max.

This tool is no longer available for sale.
Tooling and spare parts are still available.

Oleopneumatic crimping tools for M2.5 to M12 threaded inserts. TFS102 tool body separated from the booster. Recommended for use on an assembly line

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 2.5
M 3
M 4
M 5
M 6
M 8
M 10
M 12

CLUFIX-STUD™

Ø M	Steel
M 5
M 6
M 8

ENDFIX®

Ø M	Steel	Stainless Steel
M 5
M 6
M 8
M 10
M 12

FLUSHFIX®

Ø M	Steel	Stainless Steel
M 4
M 5
M 6
M 8
M 10

TOOLING FOR TFS102 and AP70304

CLUFIX®

Anvils and tie-rods

TOOLINFIX Enclume CLUFIX
ANVIL

TOOLIN'FIX Tirant CLUFIX
TIE-ROD

Ø M	Code
M 2.5	99S10201EN025
M 3	99S10201EN030
M 4	99S10201EN040
M 5	99S10201EN050
M 6	99S10201EN060
M 8	99S10201EN080
M 10	99S10201EN100
M 12	99S10201EN120

Ø M	Code
M 2.5	99S10201TI025
M 3	99S10201TI030
M 4	99S10201TI040
M 5	99S10201TI050
M 6	99S10201TI060
M 8	99S10201TI080
M 10	99S10201TI100
M 12	99S10201TI120

Extended anvils and tie-rods

TOOLINFIX Enclume Prolongée CLUFIX
ANVIL

TOOLINFIX Tirant Prolongé CLUFIX
TIE-ROD

Ø M	d x l	Code
M 4	Ø 8.5 x 25	99S10201EN201
	Ø 8.5 x 50	99S10201EN202
M 5	Ø 9.5 x 25	99S10201EN203
	Ø 9.5 x 50	99S10201EN204
M6	Ø 11.5 x 25	99S10201EN205
	Ø 11.5 x 50	99S10201EN206
M 8	Ø 14.5 x 25	99S10201EN207
	Ø 14.5 x 50	99S10201EN208

Ø M	d x l	Code
M 4	M 4 x 50	99S10201TI201
	M 4 x 75	99S10201TI202
M 5	M 5 x 54	99S10201TI203
	M 5 x 79	99S10201TI204
M 6	M 6 x 57	99S10201TI205
	M 6 x 82	99S10201TI206
M 8	M 8 x 65	99S10201TI207
	M 8 x 90	99S10201TI208

CLUFIX-STUD™

CLUFIX-STUD™ anvil and tie-rod kit

TOOLIN'FIX Enclume CLUFIX-STUD
ANVIL

TOOLINFIX Tirant CLUFIX-STUD
TIE-ROD

Ø M	Code
M 5	99S10203EN050
M 6	99S10203EN060
M 8	99S10203EN080

Ø M	Code
M 5	99S10203TI050
M 6	99S10203TI060
M 8	99S10203TI080

FLUSHFIX®

FLUSHFIX® anvils (same tie-rods as CLUFIX®)

TOOLIN'FIX Enclume FLUSHFIX
ANVIL

Ø M	Code
M 4	99S10204EN040
M 5	99S10204EN050
M 6	99S10204EN060
M 8	99S10204EN080
M 10	99S10204EN100

ENDFIX®

ENDFIX® tooling consists of an anvil dedicated to the installation of these inserts on tubes, as well as of a standard threaded tie-rod (see: CLUFIX® tooling).
Only M12 ENDFIX® with ØJ from 20 to 26 mm, necessitate the use of a specific tie-rod (Code : 99S10204TI120).

To make ENDFIX® anvils compatible with all tie-rod diameters, this tooling is accompanied by a corresponding set of sleeves. These sleeves provide the interface between the anvil and the tie-rod by limiting clearance between the two components.

ØJ ENDFIX®							Anvil code
17 / 17.5	21	25 / 25.5	29 / 29.6	34	38	42	99S10204EN201
18	22 / 22.4	26	30	35 / 35.2	39		99S10204EN202
15 / 15.5	19 / 19.5	23 / 23.5	27 / 27.6	31	36	41	99S10204EN203
16	20	24	28 / 28.5	32 / 32.6	37		99S10204EN204
13 / 13.2	17 / 17.5	21					99S10204EN205
13.6 / 14	18	22 / 22.4					99S10204EN206

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS103

code 99S103

1 825 g

• Force = 500 - 1300 daN
• Stroke = 8 mm max.

Oleopneumatic crimping tool for M3 to M8 threaded inserts

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 3
M 4
M 5
M 6
M 8

ENDFIX®

Ø M	Steel	Stainless Steel
M 5
M 6
M 8

TOOLING FOR TFS103

CLUFIX®

Anvils and tie-rods

TOOLINFIX Enclume CLUFIX
ANVIL

TOOLIN'FIX Tirant CLUFIX
TIE-ROD

Ø M	Code
M 3	99S10301EN030
M 4	99S10301EN040
M 5	99S10301EN050
M 6	99S10301EN060
M 8	99S10301EN080

Ø M	Code
M 3	99S10301TI030
M 4	99S10301TI040
M 5	99S10301TI050
M 6	99S10301TI060
M 8	99S10301TI080

ENDFIX®

ENDFIX® tooling consists of an anvil dedicated to the installation of these inserts on tubes, as well as of a standard threaded tie-rod (see: CLUFIX® tooling).
To make ENDFIX® anvils compatible with all tie-rod diameters, this tooling is accompanied by a corresponding set of sleeves. These sleeves provide the interface between the anvil and the tie-rod by limiting clearance between the two components.

ØJ ENDFIX®			Anvil code
13 / 13.2	17 / 17.5	21	99S10304EN201
13.6 / 14	18	22 / 22.4	99S10304EN202
15 / 15.5	19 / 19.5		99S10304EN203
16	20		99S10304EN204

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS104

code 99S104

3 660 g

• Force = 1100 - 2900 daN
• Stroke = 8 mm max.

Oleopneumatic crimping tool for M4 to M12 threaded inserts

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 4
M 5
M 6
M 8
M 10
M 12

ENDFIX®

Ø M	Steel	Stainless Steel
M 6
M 8
M 10
M 12

FLUSHFIX®

Ø M	Steel	Stainless Steel
M 4
M 5
M 6
M 8
M 10

TOOLING FOR TFS104

CLUFIX® - FLUSHFIX®

Anvils and tie-rods

TOOLINFIX Enclume CLUFIX
ANVIL

TOOLIN'FIX Tirant CLUFIX
TIE-ROD

Ø M	Code
M 4	99S10401EN040
M 5	99S10401EN050
M 6	99S10401EN060
M 8	99S10401EN080
M 10	99S10401EN100
M 12	99S10401EN120

Ø M	Code
M 4	99S10401TI040
M 5	99S10401TI050
M 6	99S10401TI060
M 8	99S10401TI080
M 10	99S10401TI100
M 12	99S10401TI120

ENDFIX®

ØJ ENDFIX®							Anvil code
17 / 17.5	21	25 / 25.5	29 / 29.6	34	38	42	99S10404EN201
18	22 / 22.4	26	30	35 / 35.2	39		99S10404EN202
15 / 15.5	19 / 19.5	23 / 23.5	27 / 27.6	31	36	41	99S10404EN203
16	20	24	28 / 28.5	32 / 32.6	37		99S10404EN204
13 / 13.2	17 / 17.5	21					99S10404EN205
13.6 / 14	18	22 / 22.4					99S10404EN206

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

TFS105

code 99S105

Oleopneumatic crimping tool for M8 to M16 threaded inserts

CLUFIX®

Ø M	Steel	Stainless Steel	316L Stainless Steel	Aluminium
M 8
M 10
M 12
M 14
M 16

6 190 g

• Force = 6400 daN
• Stroke = 6 - 9 mm

TOOLING FOR TFS105

CLUFIX®

Anvils and tie-rods

TOOLINFIX Enclume CLUFIX
ANVIL

TOOLIN'FIX Tirant CLUFIX
TIE-ROD

Ø M	Code
M 8	99S10501EN080
M 10	99S10501EN100
M 12	99S10501EN120
M 14	99S10501EN140
M 16	99S10501EN160

Ø M	Code
M 8	99S10501TI080
M 10	99S10501TI100
M 12	99S10501TI120
M 14	99S10501TI140
M 16	99S10501TI160

< TFS100 - TFS101 - TFS102 - TFS103 - TFS104 - TFS105 - Automation >

Automation equipment for threaded inserts

Main unit for multiple crimping with threaded inserts.
Oleopneumatic crimping tool for threaded inserts from M3 to M12. The unit can be supplied with either pedal control or double-button control. For applications using more than one unit, these can be mounted on a workbench with fixed or variable axle bases over 52 mm.

Download Oleopneumatic Crimping Tools pdf

Return to top