| Advantage |
Proof |
Benefit |
| High-strength resistance guaranteed |
Refer to data sheets |
Guaranteed of a perfect assembly |
| Guaranteed coaxiality of thread and tube on installation |
Cone-shaped design which guarantees natural self-centring |
Guarantee of perfect assembly from both functional and aesthetic perspectives |
| Guarantee of thread presence and compliance after installation |
The thread is essential to insert installation
Its presence is therefore systematically checked during the crimping operation |
An end to scrapping finished workpieces because of missing or damaged threads |
| Can be used on painted workpieces |
ENDFIX® crimping does not damage painted metal sheet during installation |
Simplification of the process: can be used on pre-painted workpieces |
| Simple installation process |
No welding station or robot - just a simple crimping tool |
1) The solution immediately covers its own costs
2) No special skills required |
| Flexibility in installation |
Installation is possible either in the workshop or on-site |
Organisational flexibility |
| High-speed installation rate |
Insert positioning + crimping operation = 3 seconds, that is 1,200 parts per hour, depending on the application |
Improved reactivity
Assembly cost savings |
| Elimination of retapping to remove weld spots |
No welding operation, just a crimping operation |
Elimination of the reworking phase |
| Elimination of retapping to remove excess paint |
Can be used on pre-painted workpieces |
Elimination of the reworking phase
No anticorrosion deterioration because no thread retapping is necessary |
| Virtually invisible, aesthetic solution |
No visible welding seam or weld spots
Invisible component located inside the tube |
Aesthetically perfect, without the additional cost of polishing the weld
No deformation of tube => no scrap |
| Clean and secure installation process |
No discharge of smoke, particles or harmful gases |
Reduction of environmental risk Improvement in working conditions |
| Compatible with all metals (aluminium, steel, etc.) |
Because the insert is installed without heating of the material, the process is similar whatever the tube material |
Process savings - whatever the tube material |
